UV DTF Stickers By Size (New)

• ✅ Effortless Uploading – Simply upload your design—no setup required, no hidden fees.
  
  

• 🎨AI Tools Included – Built-in background remover and image upscaler ensure your design looks sharp, clean, and professional.
  

• 🔥 Vibrant & Glossy Prints – Printed with UV-cured ink on clear film, our stickers are highly detailed, vibrant, and glossy with a premium look.
  

• 🛡️ Weatherproof & Long-Lasting – These stickers are scratch-resistant, waterproof, and built to last on glass, plastic, metal, wood, and more.
  
  

• ⚡ Same-Day Printing – Need it fast? No problem! Most orders are printed within hours, ensuring you get your stickers as quickly as possible.

• 💰 Smart Pricing Formula – Pay only for what you need. Our per-square-inch pricing gets better the more you order—ideal for small orders and bulk alike!

To ensure your DTF transfer looks professionally pressed every time, follow these five simple steps:

1. No Need To Pre-Press Or Pre-Iron: Removing moisture is unnecessary. Only do a prepress if you so desire.

2. Position Your Design: Take your time to line up your transfer in the desired location on your item. Normally, there is no need to use heat-resistant tape on flat heat presses to keep your design in place, however it is highly recommended when pressing transfers onto hats or when using an iron to keep the transfer in place. You’ll get a feel for when this is needed.

3. Press: Press your transfer with medium pressure at 310°F / 155°C for 15 seconds. You cannot damage the transfer by pressing with more heat, pressure, or time -- within reason. However, too much heat can damage your garment, so test first and use parchment paper or a protective guard sheet to protect your garment from a direct iron.

4. Let It Cool. Then Peel It: After pressing, let your transfer rest until it is cool to the touch (minimum of 15-30 seconds). Once cool, lift the transfer from one corner and gently peel back. This ensures every piece of your design is adhering to your item. If not, stop peeling, lay it back down, and trouble shoot as follows -- (1.) If some or all of the design does not transfer AND it was cool when peeling, it means there was not enough heat, pressure, or time. Press your transfer again with more pressure and time first (+5-10 seconds). (2.) If that doesn’t work, try 15°F heat increments until you find the sweet spot. You truly cannot damage the transfer by pressing multiple times.

5. Final Press & Wash Instructions: Place the parchment paper included or a single layer of t-shirt material over the design and press again for 15 seconds to soften the design, increase durability, and remove shine. If you want a shiny finish, cover with a protective guard sheet for the final press. When washing, flip shirt inside out, wash on cold and dry using low heat or hang.

All orders before 4 PM CST are printed and shipped out the same or next business day. Orders over $50 will automatically qualify for Free Shipping. Express shipping options are available at checkout.

All file types accepted, vector files are always preferred, raster art should be at least 300 DPI.

 Tip: If you're using Canva or Procreate, we recommend exporting your documents as PDFs